Zae Zur

Free · MPC One+ · Mac or Linux

Turn Off the Button Glow

The white buttons on the MPC One+ glow all the time. This turns the idle glow off and softens the lit buttons, or turns every button light off if you'd rather have none. The pads are not touched. Undo it any time.

Takes about 5 minutes · Tested on MPC One+ with MPC OS 3.10.1

Read This First

  • Unofficial. This is not made or supported by Akai. You use it at your own risk.
  • Developer Mode opens your MPC to your Wi-Fi. While it's on, anyone on the same network can get into the MPC without a password. Only do this at home, never on public Wi-Fi.
  • Save your project first. You'll restart the MPC a couple of times.
  • Other models: only tested on the MPC One+. On anything else the script warns you and asks before it does anything.
  • Changed your mind? Run the same line again and pick Revert. Your MPC goes back to stock after a restart.

How To Do It

  1. Turn on the Developer Panel

    On the MPC, go to Preferences > Enhancements and turn on Developer Panel. Then restart the MPC.

  2. Open the Developer screen

    Open the Menu (the grid of icons) and tap Developer. Leave that screen open. Make sure your computer is on the same Wi-Fi as the MPC.

  3. Paste one line into Terminal

    On a Mac: press Cmd + Space, type Terminal and press Return. On Linux: open your terminal. Copy this line, paste it in and press Return.

    bash <(curl -fsSL https://www.zaezur.com/apps/mpc-dimmer/mpc-dimmer.sh)
  4. Answer two questions

    First it asks for your MPC's address. Just press Return. Then it shows this menu. Type the number you want and press Return:

    1. 1 Dim: idle glow off, lit buttons soft
    2. 2 All button lights off
    3. 3 Back to stock lights
    4. 4 Quit without changing anything

    You'll see Installed when it's done.

  5. Restart the MPC

    That's it. The idle glow is gone and lit buttons are soft, or every button light is off if you picked 2.

If Something's Off

It says "Could not connect"

Check that the Developer screen is open on the MPC and that both are on the same Wi-Fi. If it still can't find it, run the line again and type the MPC's IP address instead of pressing Return. You'll find the IP in the MPC's Wi-Fi settings.

It warns that it's only tested on the One+

You have a different MPC. Type n to stop safely. If you go ahead and don't like the result, run it again and pick Revert.

What does it actually change?

It adds one small file to the MPC's storage that sits between the MPC software and the button lights, and tells the MPC to load it at startup. Nothing else is changed, and the firmware isn't touched. Revert deletes the file and removes that one setting. Want to read the script before you run it? Download it here.

Do I need to keep Developer Mode on?

You only need the Developer screen open while you run the script. We haven't tested yet whether the dimmer stays on after you switch the Developer Panel off.

I updated my MPC firmware and the glow is back

Updates can undo it. Run the line again and pick 1 or 2 to install it again.

Can I turn the button lights off completely?

Yes. Pick 2 and every button light stays off, even when a button is active. Keep in mind you lose the lights that show what's on, like record or a selected mode. You can switch between 1 and 2 any time by running the line again.

Windows?

Not for now. It works on Mac and Linux.

Free to Use

If it helps you out, donations are appreciated but never required.

Buy Me a Coffee · $5